Industrial light fitting

Use: Luminaire for illuminating industrial areas indoors and outdoors with a high degree of mechanical stress.

Technical description: The light fitting body and flange are AlSi alloy castings finished with powder paint. The optical cover is made of tempered glass. A steel suspension with an eye is fixed to the top part of the body. There are two cable outlets on the light fitting sides. There is a LED module built inside the light fitting and it is comprised of a board fitted with LEDs and a power supply. The light fitting is designed as a through light fitting, for three phase connection (five-core cable). When the light fitting is used as a terminal light fitting, the free cable outlet is blinded with a plug. The max. cross-section of the connecting conductors is 4 mm2. The light fitting is produced with plastic cable gland as standard, metal gland is available on request.

Installation: With a steel suspension with an eye ø18 mm.

Versions: Light fittings are provided with a self-resetting thermal fuse and surge guard up to 10 kV. Standard light fittings are available with cable outlets M25x1.5, optionally with cable outlets M20x1.5.

To order: Shade 254.5021/01, holder for mounting/on the ceiling 4-99.7995, holder for mounting on the wall 338.2735, cable gland plastic M20x1,5 / M25x1,5, cable gland metal M20x1,5 / M25x1,5, blinding plug M20x1,5 / M25x1,5

Lifetime: 100.000 hours, L90B10

Driver function: eCLO, ITG, IVG+, Power-up fading

Control: DALI-2