KOULE A
Use: Light fitting for the decorative light fitting of pedestrian zones, parks, orchards and other public areas.
Technical description: The light fitting consists of a carrier and body (AlSi castings) connected with screws and two semi-spherical covers. A prepreg decorative strip is fixed to the body from the outside and electrical equipment from the inside. The top cover is firmly screwed to the body, the bottom cover is fixed with PC caps. The light fitting is made in green (Z) or grey (S) colour. The light fitting is to be fixed to a column shank ø60 mm. The max. cross-section of the connecting conductors is 2.5 mm2
Installation: On a column.
Versions: The light fittings are made in a version with an electromagnetic ballast (VVG), for high-pressure sodium or halide discharge lamps. The light fittings can also be equipped with electronic adjustable ballasts (EVG DIMM). Type 446 16 xx – both covers made of opal PMMA, the luminous flux is non-directional. Type 446 17 xx – the top cover is made of prepreg, the bottom cover of clear PMMA, luminous flux is directed by a symmetrical reflector.
To order: Bottom cover (clear type 042.5549/1, opal type 042.5550/1), PC cap 317.5016/1.
Downloads:
| Type | Recommended light source [W] | Electronic ballast dimmable | Weight [kg] |
|---|---|---|---|
| 446 16 01 | High-pressure sodium discharge lamp 50 | - | 8 |
| 446 16 02 | High-pressure sodium/halide discharge lamp 70 | - | 9 |
| 446 17 01 | High-pressure sodium discharge lamp 50 | - | 8 |
| 446 17 02 | High-pressure sodium/halide discharge lamp 70 | - | 9 |